Speedangle has released a new firmware upgrade for Apex Models.
Released December 2020 Version R021
This update is strongly recommended for all users with firmware below R021.
Download Firmware Update File DashApex ENG.R021.sadfu2
DashApex R021 – THIS UPDATE IS RECOMMENDED FOR ALL APEX USERS. It includes the new features of R019 and fixes a bug of R018. Please unzip before use.
- It allows users to set a track (1 Finish Line and up to 7 Sectors) manually on a track. With this feature, if you are on a track whose map is not in your APEX, you can set the Finish Line manually at the official Finish Line location besides allowing the timer to set it automatically for you where the starting speed is reached.
- It now supports 6 Line length. Besides the original 60M and 100M, it also supports 10M, 20M, 30M, and 40M. This is especially helpful if you are on a kart track or even a small temporary track.
- It also fixes a bug of performance mode which results in timer reboot when entering performance mode if a test record in memory has a certain error.
- The corresponding User Guide: APEX User Guide R019 R021 2020 0313.
The steps are as below:
Download firmware and Software from the links below. Turn on the device
Launch SpeedAngle R4 R011 Software.
Click CONNECT to connect the device. Click DEVICE FIRMWARE UPDATE at the bottom. Browse for the firmware file.
Wait till the update is complete. This normally takes less than 10 seconds.
That's it. DO NOT disconnect the device during firmware update or disrupt the update process in any way. It is also recommended not to do the update while the computer is multi-tasking. Otherwise, the firmware in the flash might be damaged and can only be restored by sending the device back to us.